APCI/APCI+ Base For Volvo Premium Tech Tool (PTT) 2.8/2.7 Devtool 0.7.1.0 | One-Click Setup

The latest APCI+ data update is for Volvo Premium Tech Tool diagnostic software.

APCI/APCI+ Release: 9.2025

Volvo Premium Tech Tool (PTT) Version: 2.8 / 2.7

System requirements

• Volvo Premium Tech Tool software installation
• 5GB free space

Delivery

Full List of APCI / APCI+ Functions

 Diagnostic & Monitoring Functions:

• Read/clear fault codes (DTCs)

• Monitor live parameters (engine, transmission, brakes, suspension, etc.)

• Record and export data logs

• Perform actuator tests (EGR, fan, turbo, etc.)

• View ECU identification and hardware/software versions

• Reset fault memory and adaptive values

• Perform SCR/DEF system tests

• Pressure, temperature, and sensor readings (real-time)

• Component activation tests (relays, injectors, valves)

• System self-tests for ABS, VECU, EBS, and others

Programming & Configuration (Partial in APCI, Full in APCI+):

• ECU software programming (flashing modules)

• Parameter configuration (speed limit, PTO, cruise control, etc.)

• Injector coding/calibration

• AdBlue (SCR) configuration and reset

• Engine idle speed and torque limit adjustments

• Vehicle type and function selection

• Gearbox and clutch adaptations

• Fan clutch, fuel level, and temperature calibrations

• Tachograph configuration and synchronization

• Programming new or replaced modules (VECU, TECU, EECU, etc.)

• Transmission programming (AT/AMT/POWERSHIFT)

• Chassis ID and VIN synchronization

• EBS (Electronic Brake System) parameter setup

Advanced / Developer-Level Features (APCI+ Only)

• Full ECU parameter editing (custom or engineering mode)

• Hidden parameter access (not visible in normal PTT)

• Enable/disable functions (e.g., I-Shift kickdown, DRL, seatbelt reminder, etc.)

• Modify derate strategies and fault reactions (for testing only)

• Vehicle retrofit support (adding/removing components or modules)

• Advanced calibrations for sensors and actuators

• Load and manipulate configuration (.MSW, .TMP, .MDB) files

• Full flash operations via DevTool + VISFED

• Fault configuration control (fault detection logic)

• Read/write access to ECU memory (limited EEPROM data)

• Rebuild configuration from .MID or .CID files

• Modify CAN message settings (for retrofits or ECU swaps)

Vehicle Communication & System Integration

• Communication diagnostics (CAN, J1939, ISO 15765)

• ECU network scan and topology visualization

• Program new communication IDs (MID, SID)

• Synchronize ECUs in vehicle network

• Firmware compatibility check between ECUs

• VIN and chassis synchronization after ECU replacement

Maintenance & Service Functions

• Service interval reset and configuration

• DPF regeneration and soot level reset

• EGR and SCR adaptation reset

• Oil level calibration and service counter reset

• Battery management configuration

• Air dryer and compressor adaptation reset

• Clutch and gearbox learn functions

• Brake wear monitoring calibration

Special Vehicle Functions (APCI+ exclusive)

• Custom vehicle function enabling (e.g., tipper, crane, PTO)

• Retarder and brake blending configuration

• Suspension calibration (ECS, ELC, leveling valves)

• Lighting system configuration (DRL, fogs, trailer lights)

• HVAC configuration and flap calibration

• Engine Brake (VEB/VEB+) setup and fine-tuning

• Electric vehicle or hybrid parameter handling (for newer models)

Data & Database Management

• Use of APCI/APCI+ databases for parameter definitions

• Access to flash file repository (.MSW, .XML, .MID, .CID)

• Version control and ECU compatibility check

• Manage local/offline programming databases

• Integration with Developer Tool and VISFED for extended edits

Supported Vehicle Ranges

• Volvo Trucks (FH, FM, FMX, FE, FL, VN, etc.)

• Mack Trucks (Pinnacle, Granite, Anthem, etc.)

• Renault Trucks (T, C, K, D series)

• Volvo Buses and Construction Equipment (with separate database)